ACT ACTSMART2 Manual de Instalação descarregar pdf (Página 5)

ACTSmart2 Operating and Installation Manual Rev. 1.0

Unit 8, Tallaght Business Centre,

Whitestown, Dublin 24, Ireland

Tel: 353-1-4622585 Fax: 353-1-4622587

Web: http://www.accesscontrol.ie E-mail: [email protected]

access control TECHNOLOGY

30 Second Programming Guide

(For typical Standalone System)

1. Enter Programming Mode.

Press

✘

button followed by the programming code (default is 9999)

The LED will flash amber.

2. Add a Batch of Cards (ACT 1080 only)

Press 10, then present the first card in the batch followed by the last card in the batch.

Press

✔ button to complete.

3. Add a PIN Code

Press 12, and then enter a 4-digit PIN code.

Press ✔ button to complete.

(On ACT 1080 set Option 40 - Card or PIN.)

4. Set Desired Door Relay Active Time

Press 20, and then enter the desired number of seconds from 000-255 (three digits with

leading zeros). Press ✔ button to complete.

5. Change Programming code

Press 23, then enter new 4-digit programming code.

6. Exit Programming Mode

Press the

✘

button. The LED turns red.

The ACTSmart is now ready for normal use.

Note: The ACTSmart may be returned to its factory default condition at any time by entering the

programming mode and pressing 80 followed by the

✔ button.

For information on programming the advanced features and networking the ACTSmart range, please

refer to the complete programming guide.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Sem comentários

ACT ACTSMART2 Manual de Instalação Página 5