ACT ACTPRO IOM Instruções de Operação descarregar pdf (Página 31)

ACTpro 4000 Operating Instructions 1.00

__________________________________________________________________________

TCP/IP Settings

ACTpro 4000 supports connection to a Local Area Network (LAN) using Twisted-pair

Ethernet (100BASE-T or 10BASE-T) via a standard RJ-45 connector. The ACTpro 4000

supports the TCP/IP networking protocol for communications with ACTWin pro / Lite.

Configuration of TCP/IP Networking requires a DHCP or Static IP address.

IP Address

The IP Address is an identifier for the ACTpro 4000 on the TCP/IP network. For a static IP

address, the address should be entered in dot decimal notation with leading zeros e.g. IP

address 192.168.1.25 should be entered as address 192.168.001.025. The network

administrator must provide this information. If DHCP is enabled on the ACTpro 4000, this

menu displays the IP address assigned by the DHCP server. It cannot be edited.

TCP Port Number

The same TCP Port Number must be configured on the ACTpro4000 and ACTWin pro/Lite

for the establishment communications. The default port number of 10001 will be acceptable in

all cases where the ACTpro4000 and the PC running ACTWin pro/Lite are on the same

subnetwork. If they are not on the same subnetwork or you are unsure, then the network

administrator should be asked for a suitable TCP Port Number.

A second Port Number is also available for communicating with the ACTpro4000. Any port

number is suitable except the port number immediately above the main TCP port number

(i.e. if the main TCP port number is 10001, do not use 10002).

Network Mask

The Network Mask is used by the ACTpro 4000 firmware to separate the local subnetwork

address from the rest of a given IP address. The network administrator can provide this

information.

Default Gateway

The Default Gateway (Default Route) is the IP address of the router that connects the

network to other networks or the Internet. The network Administrator can provide this

address.

MAC Address

The MAC Address is a unique 48 bit number that identifies the ACTpro 4000 hardware on

the LAN. This Address is fixed at the Factory.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 54 55

Sem comentários

ACT ACTPRO IOM Instruções de Operação Página 31