ACT HANDKEY II Guia do Utilizador descarregar pdf (Página 43)

Service Menu

The Service Menu commands provide information that helps you determine if the

HandReader is operating properly and within normal operating parameters.

Once you have entered the Service menu, there are three options available for navigating

the command menu system.

• Press

Yes

to enter the command shown on the display.

• Press

to step to the next command in the menu.

• Press

Clear

to exit the command menu (pressing any numeric key also exits the

command menu). If you are in a command’s sub-menu, you may have to press

Clear

multiple times to completely exit the command menu.

There are three commands available from the Service command menu.

• Calibrate – Run calibration to check HandReader exposure values.

• Status Display – Check the status of HandReader inputs and outputs, the hand read

score of the last user to verify on the system.

• Network Status – Check the network communication status of HandReaders in the

HandKey system (master HandReader only).

Refer to and identify the commands you need to perform. Step through all previous

commands until you reach the desired command. All commands are listed in menu order.

Table 11-6: Service Command Menu

Service Menu

Password = 1

Calibrate

Recal (N/Y)

Status Display

On/Off (Y/N)

Network Status

Status Information

Navigating the

Service Menu

Service

Commands

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 87 88

Sem comentários

ACT HANDKEY II Guia do Utilizador Página 43