ACT HANDKEY II Guia do Utilizador descarregar pdf (Página 72)

Appendix C: Old Board Conﬁguration Information

Table 19-13: TS-1 - Power and Communication Connections

Terminal Connection

1 Power Input 12 to 24 VDC/VAC

2 Power Return

3 RS-422 Rx- or RS-485 Rx-/Tx-

4 RS-422 Tx- or RS-485 Rx+/Tx+

5 RS-422 Rx+

6 RS-422 Tx+

Table 19-14: TS-2 - Input Connections

Terminal Connection

7 Request to Exit Input

8 Ground

9 Door Monitor Switch Input (NC Standby)

10 Ground

11 Auxiliary Input 1

12 Ground

13 Auxiliary Input 2

14 Ground

Table 19-15: TS-3 - Card Reader and Output Connections

Terminal Connection

15 +5 VDC @ 400 mA Max. Output for External Card Reader

16 Card Reader: Wiegand D0 or Magnetic Stripe Data Input

17 Card Reader: Wiegand D1 or Magnetic Stripe Clock Input

18 Card Reader Ground

19 Lock Output or Wiegand D1 or Magnetic Stripe Clock Output

20 Ground

21 Auxiliary Output 0 or Wiegand Data 0 or Magnetic Stripe Data Output

22 Ground

23 Auxiliary Output 1

24 Ground

25 Auxiliary Output 2

26 Ground

Table 19-16: RJ-45 Serial RS-232 Connection

Pin Signal Connection

1 RI * Ring Indicator Input (from external device)

2 CD * Carrier Detect Input (from external device)

3 DTR * Data Terminal Ready Output (to external device)

4 GND Ground

5 Rx Data Receive Data Input (from external device)

6 Tx Data Transmit Data Output (to external device)

7 CTS * Clear to Send Input (from external device)

8 RTS * Ready to Send Output (to external device)

* These signals are not currently supported.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 87 88

Comentários a estes Manuais

Sem comentários

ACT HANDKEY II Guia do Utilizador Página 72

Comentários a estes Manuais